ESECO-Speedmaster®
Processors:
PAPER
FILM: Roller Transport
FILM: Dip and Dunk (Hanger)
Return to ESECO-Speedmaster Home Page
ESECO-Speedmaster® Paper Processors
On these pages, you see ESECO-Speedmaster® paper processors and Speedmatic® rack handling Rolling Floor Hoists are featured. Select the model type from the table or scroll down the page until you see what you like.
Common Features For All ESECO-Speedmaster® Paper Processors
A new range of Speedmaster® paper processing machines combine advanced technology with simplicity of operation. Each machine is manufactured using only proven components and is fully checked through each stage of manufacture to meet ESECO's commitment to quality and reliability. Rinse water bath is provided between each chemical tank eliminates chemical "carry-over" contamination. Whisper-quiet in operation, the wide variety of Speedmaster® paper processors are the right choice for the whole range of photo labs--from mini labs to commercial photo labs. The following features are common for all three types of Speedmaster® paper processors:
Solution Temperatures: Fully programmable and are controlled accurately and precisely.
Energy Saving Features: Automatic Standby: after a full process cycle is completed, the processor will enter an energy saving Standby mode; normal operation will resume when further material is loaded; Dryer Delay: an energy saving feature for delaying the operation of the dryer.
Duratrans Program: When selected, it will automatically change the process to Duratrans specifications.
Quality Built: ESECO-Speedmaster® machines are subjected to rigorous quality control procedures, and they are wet tested before leaving the factory.
Dryer Temperatures: Fully programmable and can be adjusted to operate at temperatures suitable for the type of material being processed. An automatic safety circuit prevents excessive temperatures.
Replenishment Control: The run time of the replenishment pumps is programmable to set replenishment rates precisely and quickly.
Replenishment
is automatically controlled by INFRA-RED SENSORS which
measure the area of material entering the processor. The
microprocessor in turn calculates the volume of replenishment for
the material in use in accordance with pre-set rates. LED
chemical level indicators show when the volume level of the
replenishment tanks drop too low (this
feature is optional for TableTop processors). The precision bellows pumps are individually adjusted
to deliver the precise amount of replenishment chemistry. Load Safe Indication: Infra-red sensors provide a visual
indication when material is entering the processor. An audible
signal confirms when the feed table is clear.
Racks
and Tanks have been specifically
designed to minimize all chemical oxidation and evaporation.
Furnished completely with replenishment tanks.
The Transport System is designed and manufactured to very high standards,
using only materials selected for chemical resistance and long
life. Full rolls and cut sheets can be processed with equal ease
through the staggered hard roll system.
Back to Top
| Model (click to select) |
Process | Maximum Output Speed | Width |
| TableTop | RA-4 | 20"/min. (Wash or Washless) | 14", 22", 26", 32", 43", 55" |
| B&W | Variable | 14", 22", 26", 32", 43", 55" | |
| ProSpeed | RA-4 | 71"/min. | 20", 26", 32" |
| B&W | 60"/min. | 12", 20", 26", 32" | |
| R-3 | 24"/min. | 20", 26", 32", | |
| P-3X | 22"/min. | 20", 26", 32" | |
| P-4 | 48"/min. | 20", 26", 32" | |
| P-5 | 24"/min. | 8", 12", 20" | |
| WideTrack | RA-4 | 71"/min. | 43", 55", 80" |
| B&W | 60"/min. | 43", 55", 80" | |
| R-3 | 24"/min | 43", 55" | |
| P-3X | 22"/min. | 43", 55" | |
| P-4 | 48"/min. | 43", 55" |
Special customized modifications are available upon request.
TableTop
TableTop processors are ideally suited for small laboratory and busy studio. Order washless complete with stand, tanks, electronic replenishment with level indicator or wash with stand, replenishment tanks, and water panel. All TableTop processors come with Rack Carrier and Feed Cover.
The Microprocessor Control Center: Conveniently located for ease of operation, it provides
the operator with complete control over all processing variables
at any time. Simple programming procedures allow processing
parameters to be set at the touch of a button. The result:
consistent automatic processing quality.
RA-4, Wash, 4-Tank, 20" (50 cm) per
Minute MODELS:
| Model | Cat. No. | Max. Width |
| 14RA20T | CD500W | 14" (35 cm) |
| 22RA20T | CD503W | 22" (56 cm) |
| 26RA20T | CD505W | 26" (66 cm) |
| 32RA20T | CD506W | 32" (80 cm) |
| 43RA20T | CD507W | 43" (110 cm) |
| 55RA20T | CD508W | 55" (140 cm) |
RA-4, Washless, 4-Tank, 20" (50 cm) per Minute MODELS:
| Model | Cat. No. | Max. Width |
| 22RA20T | CD503WL | 22" (56 cm) |
| 26RA20T | CD505WL | 26" (66 cm) |
| 32RA20T | CD506WL | 32" (80 cm) |
| 43RA20T | CD507WL | 43" (110 cm) |
| 55RA20T | CD508WL | 55" (140 cm) |
B&W, 4-Tank, Variable Speed MODELS:
| Model | Cat. No. | Max. Width |
| 14BWP-24T | SW500 | 14" (35 cm) |
| 22BWP-24T | SW503 | 22" (56 cm) |
| 26BWP-24T | SW505 | 26" (66 cm) |
| 32BWP-24T | SW506 | 32" (80 cm) |
| 43BWP-24T | SW507 | 43" (110 cm) |
| 55BWP-24T | SW508 | 55" (140 cm) |
ProSpeed
ProSpeed professional quality paper processors are the right choice for professional studios. In addition to many features common to all processors, Speedmaster® machines also have a Seven Day Timer, programmable for automatically starting up and shutting down the processor. Selectable wash water modes: economy or continuous flow.
The Microprocessor
Control Panel
Provides complete access to all programmable and selectable
features at any time.
RA-4, 4-Tank MODELS
| Model | Cat. No. | Max. Width | Processing Speed |
| 20RA28 | CD206 | 20" (50 cm) | 28"/min. (70 cm/min.) |
| 20RA37 | CD210 | 20" (50 cm) | 37"/min. (95 cm/min.) |
| 20RA47 | CD208 | 20" (50 cm) | 47"/min. (120 cm/min.) |
| 26RA28 | CD221 | 26" (66 cm) | 28"/min. (70 cm/min.) |
| 26RA37 | CD225 | 26" (66 cm) | 37"/min. (95 cm/min.) |
| 26RA47 | CD223 | 26" (66 cm) | 47"/min. (120 cm/min.) |
| 32RA28 | CD236 | 32" (80 cm) | 28"/min. (70 cm/min.) |
| 32RA37 | CD240 | 32" (80 cm) | 37"/min. (95 cm/min.) |
| 32RA47 | CD238 | 32" (80 cm) | 47"/min. (120 cm/min.) |
RA-4, 5-Tank MODELS
| Model | Cat. No. | Max. Width | Processing Speed |
| 20RA28 | CD207 | 20" (50 cm) | 28"/min. (70 cm/min.) |
| 20RA37 | CD211 | 20" (50 cm) | 37"/min. (95 cm/min.) |
| 20RA47 | CD209 | 20" (50 cm) | 47"/min. (120 cm/min.) |
| 26RA28 | CD222 | 26" (66 cm) | 28"/min. (70 cm/min.) |
| 26RA37 | CD226 | 26" (66 cm) | 37"/min. (95 cm/min.) |
| 26RA47 | CD224 | 26" (66 cm) | 47"/min. (120 cm/min.) |
| 26RA71 | CD228 | 26" (66 cm) | 71"/min. (180 cm/min.) |
| 32RA28 | CD237 | 32" (80 cm) | 28"/min. (70 cm/min.) |
| 32RA37 | CD241 | 32" (80 cm) | 37"/min. (95 cm/min.) |
| 32RA47 | CD239 | 32" (80 cm) | 47"/min. (120 cm/min.) |
| 32RA71 | CD242 | 32" (80 cm) | 71"/min. (180 cm/min.) |
B&W, 4-Tank, Variable Speed MODELS
| Model | Cat. No. | Max. Width |
| 12BWP-60 | SW311 | 12" (30 cm) |
| 20BWP-60 | SW313 | 20" (50 cm) |
| 26BWP-60 | SW315 | 26" (66 cm) |
| 32BWP-60 | SW316 | 32" (80 cm) |
Color Reversal Kodak R-3, 8-Tank MODELS
| Model | Catalog No. | Max. Width | Processing Speed |
| 20R3-15 | R351 | 20" (50 cm) | 15"/min. (37 cm/min.) |
| 20R3-24 | R352 | 20" (50 cm) | 24"/min. (60 cm/min.) |
| 26R3-15 | R354 | 26" (66 cm) | 15"/min. (37 cm/min.) |
| 26R3-24 | R355 | 26" (66 cm) | 24"/min. (60 cm/min.) |
| 32R3-15 | R357 | 32" (80 cm | 15"/min. (37 cm/min.) |
| 32R3-24 | R358 | 32" (80 cm | 24"/min. (60 cm/min.) |
Ilfochrome P-3X, 8-Tank, 22" (56 cm) per Minute MODELS
| Model | Cat. No. | Max. Width |
| 20P3X-22 | R391 | 20" (50 cm) |
| 26P3X-22 | R392 | 26" (66 cm) |
| 32P3X-22 | R393 | 32" (80 cm) |
Ilfochrome P-4, 5-Tank, 48" (123 cm) per Minute MODELS
| Model | Cat. No. | Max. Width |
| 20P4-48 | C381 | 20" (50 cm) |
| 26P4-48 | C382 | 26" (66 cm) |
| 32P4-48 | C383 | 32" (80 cm) |
Ilfochrome P-5, 24" (60 cm) per Minute MODELS
| Model | Cat. No. | Max. Width | No. of Tanks |
| 8P5-24 | C371 | 8" (20 cm) | 6 |
| 12P5-24 | C372 | 12" (30 cm) | 6 |
| 20P5-24 | C373 | 20" (50 cm) | 8 |
WideTrack
WideTrack professional quality paper processors are the
right choice for professional studios and commercial photo labs.
In addition to many features common to all processors, Speedmaster®
machines also have a Seven Day Timer, programmable for automatically starting up and
shutting down the processor.
Optional Equipment:
Roll Feed and Take-Up
Attachment and Take-Up Spools
RA-4, 4-Tank MODELS
| Model | Cat. No. | Max. Width | Processing Speed |
| 43RA28 | CD250 | 43" (110 cm) | 28"/min. (71 cm/min.) |
| 43RA32 | CD251 | 43" (110 cm) | 32"/min. (80 cm/min.) |
| 43RA37 | CD255 | 43" (110 cm) | 37"/min. (95 cm/min.) |
| 43RA49 | CD253 | 43" (110 cm) | 49"/min. (125 cm/min.) |
| 55RA28 | CD265 | 55" (140 cm) | 28"/min. (71 cm/min.) |
| 55RA32 | CD266 | 55" (140 cm) | 32"/min. (80 cm/min.) |
| 55RA37 | CD270 | 55" (140 cm) | 37"/min. (95 cm/min.) |
| 55RA49 | CD268 | 55" (140 cm) | 49"/min. (125 cm/min.) |
| 80RA32 | CD291 | 80" (200 cm) | 32"/min. (80 cm/min.) |
| 80RA37 | CD295 | 80" (200 cm) | 37"/min. (95 cm/min.) |
| 80RA49 | CD293 | 80" (200 cm) | 49"/min. (125 cm/min.) |
RA-4, 5-Tank MODELS
| Model | Cat. No. | Max. Width | Processing Speed |
| 43RA32 | CD252 | 43" (110 cm) | 32"/min. (80 cm/min.) |
| 43RA37 | CD256 | 43" (110 cm) | 37"/min. (95 cm/min.) |
| 43RA49 | CD254 | 43" (110 cm) | 49"/min. (125 cm/min.) |
| 43RA71 | CD257 | 43" (110 cm) | 71"/min. (180 cm/min.) |
| 55RA32 | CD267 | 55" (140 cm) | 32"/min. (80 cm/min.) |
| 55RA37 | CD271 | 55" (140 cm) | 37"/min. (95 cm/min.) |
| 55RA49 | CD269 | 55" (140 cm) | 49"/min. (125 cm/min.) |
| 55RA71 | CD272 | 55" (140 cm) | 71"/min. (180 cm/min.) |
| 80RA32 | CD292 | 80" (200 cm) | 32"/min. (80 cm/min.) |
| 80RA37 | CD296 | 80" (200 cm) | 37"/min. (95 cm/min.) |
| 80RA49 | CD294 | 80" (200 cm) | 49"/min. (125 cm/min.) |
| 80RA71 | CD298 | 80" (200 cm) | 71"/min. (180 cm/min.) |
B&W, 4-Tank, Variable Speed MODELS
| Model | Cat. No. | Max. Width |
| 43BWP-60 | SW318 | 43" (110 cm) |
| 55BWP-60 | SW320 | 55" (140 cm) |
| 80BWP-60 | SW322 | 80" (200 cm) |
R-3, 8-Tank MODELS
| Model | Cat. No. | Max. Width | Processing Time |
| 43R3-15 | R359 | 43" (110 cm) | 15"/min. (38 cm/min.) |
| 43R3-24 | R360 | 43" (110 cm) | 24"/min. (60 cm/min.) |
| 55R3-15 | R362 | 55" (140 cm) | 15"/min. (38 cm/min.) |
| 55R3-24 | R363 | 55" (140 cm) | 24"/min. (60 cm/min.) |
P-3X, 8-Tank, 22" (55 cm) per Minute MODELS
| Model | Cat. No. | Max. Width |
| 43P3X-22 | R394 | 43" (110 cm) |
| 55P3X-22 | R395 | 55" (140 cm) |
P-4, 5-Tank, 48" (123 cm) per Minute MODELS
| Model | Cat. No. | Max. Width |
| 43P4-48 | C384 | 43" (110 cm) |
| 55P4-48 | C385 | 55" (140 cm) |
Rack Handling Rolling Floor Hoists
The Speedmatic® Rolling Floor Hoist makes processor rack removal and replacement both simple and safe. Move the hoist easily into position, lift the rack, and roll it directly to the cleaning area. The hand crank winch allows you to lift up to 1,200 pounds (448 kg) safely with a minimum effort. The automatic safety braking feature holds the load when you stop pressure on the lifting crank. The Speedmatic® Rolling Floor Hoist provides greater versatility than a fixed overhead system. Adjustable in both height and width by simply telescoping into companion square steel tube.
The Speedmatic® Rolling Floor Hoist is the most economical and safe method of rack handling. One system serves all your heavy lifting needs.
Available in two sizes:
52" (132 cm)
Wide, Cat.# 9085
85" (216 cm) Wide,
Cat.# 9087
Back to
Top
Return to ESECO-Speedmaster
Home Page
ESECO-Speedmaster® Roller
Transport Film Processors
On these pages, ESECO-Speedmaster®
roller transport film processors are featured. Select the
model type of interest from the table or scroll down the page
until you see what you like. If you are interested in Dip
and Dunk (hanger) processors, click
here.
Common Features For All ESECO-Speedmaster® Roller Transport FILM Processors
A new range of processing machines, which combine advanced technology with simplicity of operation: Each machine is manufactured using only proven components and is fully checked through each stage of manufacture to meet ESECO's commitment to quality and reliability. Rinse water bath provided between each chemical tank eliminates chemical "carry-over" contamination. Whisper-quiet in operation, the wide variety of Speedmaster® film processors are the right choice for the whole range of photo labs--from mini labs to commercial photo labs. The following features are common for all three of Speedmaster® film processors:
Solution Temperatures: Fully programmable and are controlled accurately and precisely.
Energy Saving Features: Automatic Standby: after a full process cycle is completed, the processor will enter an energy saving Standby mode, normal operation will resume when further material is loaded; Dryer Delay: an energy saving feature for delaying the operation of the dryer.
Quality Built: ESECO-Speedmaster® machines are subjected to rigorous quality control procedures, and they are wet tested before leaving the factory.
Automatic On-Line Drying: A high efficiency warm air drying system is an integral feature of the processors. An evenly distributed stream of filtered air at an accurately controlled temperature ensures quality drying under different ambient conditions. Fully programmable dryer temperatures can be adjusted to operate at temperatures suitable for the type of material being processed. An automatic safety circuit prevents excessive temperatures.
Replenishment Control: The run time of the replenishment pumps is programmable to set replenishment rates precisely and quickly.
| Model (click to select) |
Process | Max. Output Speed | Max. Output of per Hour (35 mm Film with 24 Exposures) |
Width | |
| Micro | C-41 | 8"/min. (20 cm/min.) | 22 Rolls | 6" (15 cm) | |
| C-41RA | 10"/min. (26 cm) | 28 Rolls | 6" (15 cm) | ||
| E-6 | 6"/min.(15 cm/min.) | 18 Rolls | 6" (15 cm) | ||
| B&W | 21"/min. (54 cm/min.) | 60 Rolls | 6" (15 cm) | ||
| Professional | C-41 | 12"-25"/min.* (30-64 cm/min.) | 42-205 Rolls* | 8" (20 cm), 12" (30 cm), 20" (50 cm) | |
| E-6 | 10"/min. (26 cm/min.) | 36-84 Rolls* | 8" (20 cm), 12" (30 cm), 20" (50 cm) | ||
| B&W | 14"/min. (35 cm/min.) | 48-145 Rolls* | 8" (20 cm), 12" (30 cm), 20" (50 cm), 26" (66 cm) | ||
| Ilfochrome P-5 | 24"/min. (60 cm/min.) | 83-194 Rolls* | 8" (20 cm), 12" (30 cm), 20" (50 cm) | ||
*Depends on model; for details, go to the bottom of this page.
Special customized modifications are available upon request.
"Whisper Quiet" Operation
Assures Pleasant Working Area
Replenishment is automatically
controlled by INFRA-RED
SENSORS which measure the area of material entering the
processor. The microprocessor in turn calculates the volume of
replenishment for the material in use in accordance with pre-set
rates. The precision bellows pumps are individually adjusted to
deliver the precise amount of replenishment chemistry. Load Safe Indication: Infra-red sensors provide a visual
indication when material is entering the processor. An audible
signal confirms when the feed table is clear.
Racks and Tanks have been specifically designed to minimize chemical
oxidation and evaporation. The transport rollers are located
beneath the solution levels. This eliminates daily rack cleaning
because of evaporation residue. When necessary, racks are easily
and quickly removed for maintenance. Furnished with replenishment
tanks.
The Transport
System is designed and
manufactured to very high standards, using only materials
selected for chemical resistance and long life. Full rolls and
cut sheets can be processed with equal ease through the staggered
hard roll system. The transport has a standard speed, or the
speed can be varied. This feature is invaluable for push and
pull processing, as well as for E-6 and B&W.
Back to Top
Optional Long Roll Feed Attachment
Optional
Motorized Take-Up Assembly
Back to Top
Micro 
The Speedmaster® Micro film processors are small in size and "whisper quiet" in operation. Available for C-41, E-6, and B&W, they are ideally suited for the mini lab or professional use. Sheet film, short or long rolls can be processed. All Micro film processors come with rack carrier, feed cover, and replenishment tanks.
| MODEL | Catalog No. | Process | No. of Tanks | Max. Width | Speed |
| 6C41-10M | F409RANP | C-41 | 6 Washless | 6" (15 cm) | 10"/min. (26 cm/min.) |
| 6C41-8M | F413 | C-41 | 6 Wash | 6" (15 cm) | 8"/min. (20 cm/min.) |
| 6E6-6M | E4114M | E-6 | 9 | 6" (15 cm) | 6"/min. (15 cm/min.) |
| 6BWF-21M | SW400M | B&W | 5 | 6" (15 cm) | 21"/min. (54 cm/min.) |
Professional
Compact in size and quiet in operation Speedmaster®
Professional
film processors are the best choice for professional studios and
commercial photo labs. All processors come with rack carrier,
feed cover, seven day timer, and replenishment tanks.
Wash Water Options:
Fully programmable to operate as a conventional wash water system
supplying fresh water for the duration of a process cycle, or a
replenished water system. For even greater efficiency, a periodic
cleaning cycle is initiated during standby rinsing the
"crossover" rollers to prevent crystallization and dirt
related problems.
Microprocessor
Control Center
Receiving Tray
with Detachable Sheet Film Tray
Compact
and easy to attach Daylight Feed
is ideal for minilabs
C-41 PROCESS
| Model | Catalog No. | No. of Tanks | Max. Width | Speed |
| 8C41-12 | F405 | 6 | 8" (20 cm) | 12"/min. |
| 8C41-12NP | F406 | 6 Washless | 8" (20 cm) | 25"/min. |
| 8C41-25 | F407 | 9 | 8" (20 cm) | 25"/min. |
| 12C41-12 | F410 | 6 | 12" (30 cm) | 12"/min. |
| 12C41-25 | F412 | 9 | 12" (30 cm) | 25"/min. |
| 20C41-12 | F415 | 6 | 20" (50 cm) | 12"/min. |
| 20C41-25 | F417 | 9 | 20" (50 cm) | 25"/min. |
E-6 PROCESS
| Model | Catalog No. | No. of Tanks | Max. Width | Speed |
| 8E6-10 | F401 | 9 | 8" (20 cm) | 10"/min. (26 cm/min.) |
| 12E6-10 | F402 | 9 | 12 (30 cm) | 10"/min. (26 cm/min.) |
| 20E6-10 | F403 | 9 | 20" (50 cm) | 10"/min. (26 cm/min.) |
B&W PROCESS
| Model | Catalog No. | No. of Tanks | Max. Width | Speed |
| 8BWF-14 | SW401 | 5 | 8" (20 cm) | 14"/min. (35 cm/min.) |
| 12BWF-14 | SW402 | 5 | 12" (30 cm) | 14"/min. (35 cm/min.) |
| 20BWF-14 | SW403 | 5 | 20" (50 cm) | 14"/min. (35 cm/min.) |
| 26BWF-14 | SW404 | 5 | 26" (66 cm) | 14"/min. (35 cm/min.) |
Ilfochrome P-5 PROCESS
| Model | Catalog No. | No. of Tanks | Max. Width | Speed |
| 8P5-24 | C371 | 6 | 8" (20 cm) | 24"/min. (60 cm/min.) |
| 12P5-24 | C372 | 6 | 12" (30 cm) | 24"/min. (60 cm/min.) |
| 20P5-24 | C373 | 8 | 20" (50 cm) | 24"/min. (60 cm/min.) |
Return to ESECO-Speedmaster Home Page
ESECO-Speedmaster® Dip
and Dunk (Hanger) Film Processors
On these pages, ESECO-Speedmaster®
Dip and
Dunk (hanger) film processors are featured. Select the model type of
interest from the table below or scroll down the page until you see
what you like. If you are interested in roller
transport film processors, click here.
Common Features For All ESECO-Speedmaster® Dip and Dunk FILM Processors
A new range of processing machines, which combine advanced technology with simplicity of operation: Each machine is manufactured using only proven components, and is fully checked through each stage of manufacture to meet ESECO's commitment to quality and reliability. Rinse water bath is provided between each chemical tank eliminates chemical "carry-over" contamination. The wide variety of Speedmaster® film processors are the right choice for the whole range of photo and radiology labs.
The following features are common for all models of Speedmaster® Dip and Dunk film processors:
Solution Temperatures: Fully programmable and are controlled accurately and precisely.
Energy Saving Features: Automatic Standby: after a full process cycle is completed, the processor will enter an energy saving standby mode, normal operation will resume when further material is loaded; Dryer Delay: an energy saving feature for delaying the operation of the dryer.
Quality Built: ESECO-Speedmaster® machines are subjected to rigorous quality control procedures, and they are wet tested before leaving the factory.
Automatic On-Line Drying: A high efficiency warm air drying system is an integral feature of the processors. An evenly distributed stream of filtered air at an accurately controlled temperature ensures quality drying under different ambient conditions. Fully programmable dryer temperatures can be adjusted to operate at temperatures suitable for the type of material being processed. An automatic safety circuit prevents excessive temperatures.
Replenishment Control: The run time of the replenishment pumps is programmable to set replenishment rates precisely and quickly.
Special customized modifications are available upon request.
Extremely quiet in
operation the Speedmaster® Dip and Dunk
film processing machines are the right choice for commercial
photo labs. Sixty-nine different models of Dip
and Dunk processors are available for all
processes in five categories: Economy, EconomyPro,
Compact, Standard, Push and Hold.
Different optional replenishment systems and other accessories
are available as well. Contact us, and we will find the category
and model of the processor to meet your specific needs.
Microprocessor Control Center:
Conveniently located for ease of operation. The
system incorporates a high quality industrial computer which is
driven by advanced software. A liquid crystal display screen
(adjustable for different lighting conditions) provides a
continuous graphic display of all process functions that include
temperatures, time, agitation, wash cycles, hanger locations, and
replenishment data. The operator has access to all processing
parameters through a menu-driven display. Replenishment rates,
temperatures, developing times, and standby cycles can be
accurately programmed at the microprocessor and integrated into
an informative alarm display to ensure safe operation at all
times.
Transport System:
Dip and Dunk processors incorporate a four corner touch-safe lift
assembly, the speed of which is controlled by the microprocessor.
Processing cycle times can be pre-programmed in up to sixteen
memory channels, and on Push
and Hold models, cycle times
can be selected automatically by "user coded" hangers.
Replenishment:
The replenishment system is fully automatic. Data
relating to film format and quantities is entered into the
computer which in turn calculates precise replenishment cycles to
meet the required specifications. The in-line replenishment
systems can be easily integrated with the processor.
Tanks:
Chemical tanks are individually heated,
temperature-controlled, recirculated, and filtered with level
protection systems to ensure safe operation. A built-in
compressor provides air agitation which is individually
controlled to relevant solutions. Nitrogen agitation is
accurately controlled to pre-set rates.
Safety Systems:
The transport system, agitation, screen logic, and
safety systems are supported by battery-driven power circuits to
ensure that film is fully protected in the event of a power
failure. A mechanical "light-lock" system provides
security against film fogging if the dryer door is opened during
a lift cycle.
Optional Automatic Chemical Blender (Cat.# PA0027)
Chemical Blender mixes chemicals and water on demand as they are consumed in processing. This assures constant supply of fresh replenisher, eliminates the need for replenishment storage tanks, mixing equipment, handling of hazardous chemicals, and mixing errors. Customer-specified models are available for all photo chemicals.