ESECO-Speedmaster®
ESECO-Speedmaster®
Increase Productivity
Equipment for Photographic, Graphic Arts and Radiology Industries since 1956
General Information on Doors
or
Windows
Guide Specifications for
Doors
or
Windows
Information on Wheelchair accessibility
Dimensions for 2-Way Doors
Dimensions for 3-Way and
4-Way Doors
Dimensions for Windows
* Please note: All prices and specifications are subject to change without notice.
** Please contact us for current pricing.
*** MSDS Data Sheets Available on request.
Speedmatic®: General Information
The latest in safe, easy access to darkrooms,
photo labs, inflatable buildings, x-ray labs, graphic arts,
cleanrooms, computer rooms, hospitals, laboratories, air lock
structures. Keeps darkrooms cleaner and completely light-safe,
protecting expensive light-sensitive materials from fogging.
Personnel can enter and leave the darkroom without interfering
with other activities.
Revolving darkroom doors are manufactured using Dow Lustran ABS and electrically pre-coated, anti-corrosion treated steel. Two-way, three-way, and four-way models in many popular sizes are available. The doors can be for permanent installation, hinged, or safety "pop-out" with break-away hardware. Also, ADA handicapped accessible doors are available in many popular sizes. All gaskets are provided to insure complete lightproof and dustproof protection when door is in operation or in stopped position. The door has felt sealing strips between the two cylinders to finish the light seal. Non-slip rubber floor covering greatly reduces the chance of tripping. The stationary floor not only prevents accidents but also makes the needed light seal at the bottom. Riveted and welded steel members for extra strength, reinforced steel flanges, easy rotation, center suspension, self-aligning ball bearings - these are only a few of many features of Speedmatic® Revolving Darkroom Doors. Wheelchair ramps are available for handicapped accessible models. The doors are normally shipped boxed, fully assembled and ready to install. Installation time: 1 man/hour. No door frame needed, all you do is fit it to the correct door opening. For a small nominal fee, it can also be ordered knocked-down or partially knocked-down for easy re-assembly on the job site. There is NO EXTRA CHARGE for standard domestic packing and crating. We will gladly drop ship to the job site to save you money.
YOUR CHOICE of Revolving Doors for Photo Labs, Inflatable Buildings, X-Ray Labs, Graphic Arts, Cleanrooms, Computer Rooms, Hospitals, Laboratories, Air Lock Structures:
MATERIAL
Dow Lustran ABS or
Electrically Pre-Coated, Rust-Preventative 20 Gauge Steel
MODEL
2-Way, 3-Way or 4-Way
SIZE
Thinline (28"/71cm), Standard (36"/91cm, 41"/104cm, 48"/122cm), or Handicapped Accessible (54"/137cm, 65"/165cm, 72"/183cm)
FINISH
Black, Amber, Ruby-Red, or Clearview
INSTALLATION
Permanent, Hinged, or Pop-Out with Break-Away Hardware
MATERIAL
ABS: 0.090"
(0.229 cm) thick Black Dow Lustran,
a rigid high-impact Acrylonitrile Butadiene Styrene.
ABS has excellent rigidity, toughness, dimensional
stability, and impact strength. ABS doors will not dent,
crack or tear upon impact, will retain their original
shape when accidentally struck, will not rust in the
humid lab environment; they will never need painting.
Metal: Corrosion-resistant
20 gauge steel. Steel parts are coated with
anti-reflection paint to reduce stray light. All openings
are reinforced by aluminum tubing. Supports and trim are
factory finished with black Polane matte paint.
Transfer casters on the metal door bottom are provided
for easy mobility.
SIZE/MODEL
2-Way: Thinline
(28"/71cm), Standard (36"/91cm, 41"/104cm,
48"/122cm), Handicapped Accessible (54"/137cm,
65"/165cm).
3-Way: Standard
(48"/122cm), Handicapped Accessible
(72"/183cm).
4-Way: 54"/137cm
wide.
FINISH
Black: For
photo labs; furnished in black to reduce reflection of
stray light. Never needs painting; can be painted, if
desired, to match the color scheme.
Amber: for
Graphic Arts.
Ruby-Red: for Radiology Facilities and Graphic Arts.
Clearview: for cleanrooms, computer rooms, laboratories,
hospitals, and air lock structures.
INSTALLATION
Permanent: attaching directly to the wall.
Pop-Out: With unique break-away hardware, makes it easy to
push the door out in case of emergency or moving large
pieces of equipment in and out. Break-away hardware is
easily installed with aluminum strip extrusions along the
edge and another attached to the wall. A 2" (5.1 cm)
wide neoprene rubber strip inserted between the two
completes the light seal.
Hinged: Swings
open as a regular door; has a continuous hinge on one
side and rollers on the other, can be moved
instantaneously in case of emergency or routine cleaning
requirements.
Wheel chair accessible with ramps
• ADA Ramps for wheelchair accessible models
• Ramps available for 2-way 54", 2-way 65", and 3-way 72"
• Free standing
• Easy cleaning
• Non-slip surface
• No installation
REVOLVING
PASS-THROUGH WINDOWS: for Specimen, Cassette, and Film Transfer
• Sturdy construction of rigid high-impact
polystyrene
• Steel members riveted and welded for extra strength
• Center guide bearing provides vertical alignment
• Easy rotation on lower guide bearings
• Never needs painting
Pass-Through windows allow access to the darkroom
for material handling: personnel inside the darkroom can
conveniently send and receive sensitized goods such as x-ray,
film, or specimen without disturbing the routine work flow.
Rotating pass-through windows are normally installed at a height
36" (91 cm) to 42" (107 cm) from floor eliminating
potential safety hazards when working in darkroom conditions.
Made of Dow Lustran ABS (Flash Point 730°F - 752°F [388°C - 400°C], conforms to UL Flame Class Rate of 94 HB), the window will never need painting and will not dent, crack or tear upon impact. To simplify the attachment to the wall, the window frame is rigidly constructed with metal flanges. An extra set of metal flanges is provided for the trimming of the outside wall. Bottom center glide bearings guarantee smooth and quiet operation. Felt entry seals assure light-tight operation.
WARRANTY
ESECO warranty to the original purchaser
(applicable in the United States only): Should any Speedmatic®
Door or Window fail to perform as specified within thirty (30)
months from date of installation, because of a factory defect in
parts or workmanship, we agree to make it function as good as new
again without hassle. This warranty does not apply to damage
caused by abuse, accident, neglect, fire or other abnormal
conditions beyond Company’s control.
PART 1 - GENERAL
1.1.1. SYSTEM DESCRIPTION
Revolving Darkroom Doors are light-safe for
handling light sensitized materials. Unrestricted easy operator
access and exit for any type of darkroom.
1.1.2. QUALITY ASSURANCE
We, the manufacturer, certify that the material
has been manufactured and tested in accordance with standard
trade practices and is free from defects in material and
workmanship at the time of shipment from the factory.
1.1.3. REFERENCES
ESECO Revolving Darkroom Doors
have been in use since 1969. Installations of Speedmatic®
Revolving Darkroom Doors include thousands of commercial,
government, hospitals, and industrial customers. A list of users
will be furnished upon request.
1.1.4. WARRANTY
ESECO warrants this equipment to the original
purchaser as follows: Should any Speedmatic®
Door fail to perform as specified within a period of thirty (30)
months from date of installation, because of a factory defect in
parts or workmanship, we agree to make it function as good as new
again without hassle.
PART 2 - PRODUCTS
2.1. ACCEPTABLE MANUFACTURER
ESECO-Speedmaster®
2.1.1. COMPONENTS
DOOR:
A. ABS Door: 0.090" (0.229 cm) thick Black
Dow Lustran, a rigid
high-impact Acrylonitrile Butadiene Styrene, manufactured by Monsanto
Chemical Company. The Dow Lustran
material will not dent, crack or tear upon impact. This material
will also retain its original shape when accidentally struck and
will not rust in the humid photo lab environment. ABS is a
petroleum hydrocarbon. Flash Point 730°F - 752°F (388°C -
400°C) degrees. Flame class UL-94 HB.
B. Steel Door: fabricated of 20 gauge, cold rolled,
anti-corrosion treated steel.
SUPPORTS:
The inner rotating cylinder is center-suspended
with a sealed thrust ball bearing, rubber shock mounted. This
cylinder is contained in a U-shaped track that provides perfect
rotation. Formed steel side flanges provide permanent rigidity.
PAINT:
All corrosion treated steel parts are coated with
black Polane matte paint to reduce reflection of stray
light.
ATTACHMENTS:
All entrance and exit openings are reinforced by
1"×1" (2.5 cm × 2.5 cm) square aluminum tubing.
SAFETY HARDWARE:
Pop-out type break-away system. J shaped aluminum
extrusion with 0.25" (0.64 cm) recess is secured to the wall
and an identical extrusion is fastened to the rotating door
flanges. This is on the top and both sides of the door. The door
is pushed into position and a 2"×0.125" (5 cm × 0.318
cm) flexible neoprene strip is inserted into the groove. Removal
of the door is accomplished by pushing or pulling on the door.
The flexible neoprene strip disengages from the extrusion,
allowing immediate access.
FLOORING:
Covered with a black rubber non-slip mat. The
steel doors come with rollers (not available on the
65"/165cm and 72"/183cm steel doors) to facilitate
installation and removal.
INTERNAL HANDRAIL:
Operation from the inside of the door is
facilitated by a convenient handrail.
EXTERNAL FINGER GRIPS:
Operation from the outside of door through
recessed finger grips in the rotating cylinder.
FLUORESCENT MARKERS:
Luminescent fluorescent markers are provided for
easy location in the dark when the door is rotated.
PART 3 - EXECUTION
3.1. INSTALLATION
Outer wall must be flat for a distance of 5"
(12.7 cm) top and sides. No door frame needed. Inside wall may be
trimmed out. Floor must be leveled and smooth. Normal
installation time: 1 man/hour.
3.1.1. PREPARATION
The Speedmatic® door is
normally shipped boxed, skidded, and assembled ready to install.
3.1.2. ERECTION
Knock-Down doors are available for on-site
assembly. Shipped with complete instructions. Allow 1.5 hour
assembly time.
PART 1 - GENERAL
1.1.1. SYSTEM DESCRIPTION
Revolving Pass-Through Windows are light-safe for
handling light sensitized materials. Unrestricted easy operator
access and specimens, cassette, film and other materials transfer
to and from any type of rooms.
1.1.2. QUALITY ASSURANCE
We, the manufacturer, certify that the material
has been manufactured and tested in accordance with standard
trade practices and is free from defects in material and
workmanship at the time of shipment from the factory.
1.1.3. REFERENCES
ESECO Revolving Pass-Through
Windows have been in use since 1969. Installations of Speedmatic®
Revolving Pass-Through Windows include many commercial,
government, hospitals, and industrial customers. A list of users
will be furnished upon request.
1.1.4. WARRANTY
ESECO warrants this equipment to
the original purchaser as follows: Should any Speedmatic®
window fail to perform as specified within a period of thirty
(30) months from date of installation, because of a factory
defect in parts or workmanship, we agree to make it function as
good as new again without hassle.
PART 2 - PRODUCTS
2.1. ACCEPTABLE MANUFACTURER
ESECO-Speedmaster®
2.1.1. COMPONENTS
PASS-THROUGH:
Two cylinders ABS Window: 0.090" (0.229 cm)
thick Black Dow Lustran,
a rigid High-Impact Acrylonitrile Butadiene Styrene. ABS is a
petroleum hydrocarbon. Flash Point 730°F - 752°F (388°C -
400°C). Flame class UL-94 HB.
SUPPORTS:
Rigidly constructed frame with metal flanges for
simplified wall attachment. An extra set of metal flanges are
provided for the trim-out of the outside wall. The inner rotating
cylinder is center-suspended with a sealed thrust bearing, rubber
shock mounted.
FLOORING:
The inner cylinder is attached to a lazy Susan
base with ball bearings, providing for smooth rotation. The
wooden floor is covered with a black rubber mat.
PAINT:
All corrosion treated steel parts are coated with
black Polane matte paint to reduce reflection of stray light.
ATTACHMENTS:
The window openings are reinforced by
1"×1" (2.5 cm × 2.5 cm) square aluminum tubing.
EXTERNAL FINGER GRIPS:
Operation from the outside is through use of
recessed finger grips in the rotating cylinder.
FLUORESCENT MARKERS:
Luminescent fluorescent markers are provided for
easy location in the dark.
2.1.2. WARRANTY:
ESECO warrants this equipment to
the original purchaser as follows: Should any Speedmatic®
product fail to perform as specified within a period of thirty
(30) months from date of installation, because of a factory
defect in parts or workmanship, we agree to make it function as
good as new again without the hassle.
| DIMENSIONS for Speedmatic® REVOLVING 2-Way DOORS | ||||||
Thinline |
Standard Sizes |
Handicapped Accessible |
||||
DESCRIPTION |
28" |
36" |
41" |
48" |
54" |
65" |
Overall Height |
82.25" |
82.25" |
82.25" |
82.25" |
82.25" |
82.25" |
208.91 cm |
208.91 cm |
208.91 cm |
208.91 cm |
208.91 cm |
208.91 cm |
|
Wall Opening Height* |
81" |
81" |
81" |
81" |
81" |
81" |
205.74 cm |
205.74 cm |
205.74 cm |
205.74 cm |
205.74 cm |
205.74 cm |
|
Wall Opening Width* |
29" |
36" |
42" |
49.5" |
56" |
67" |
73.66 cm |
91.44 cm |
106.68 cm |
125.73 cm |
142.24 cm |
170.18 cm |
|
Overall Diameter |
28" |
35" |
40.5" |
46.75" |
53" |
65.25" |
71.12 cm |
88.9 cm |
102.87 cm |
118.74 cm |
134.62 cm |
165.74 cm |
|
Inside Diameter |
25.5" |
32.5" |
38.5" |
45" |
51" |
63.5" |
64.77 cm |
82.55 cm |
97.79 cm |
114.3 cm |
129.54 cm |
161.29 cm |
|
Inside Height |
74.75" |
74.75" |
74.75" |
74.75" |
74.75" |
74.75" |
189.86 cm |
189.86 cm |
189.86 cm |
189.86 cm |
189.86 cm |
189.86 cm |
|
Entrance Width |
18" |
21.5" |
26" |
30" |
36" |
42" |
45.72 cm |
53.75 cm |
66.04 cm |
76.2 cm |
91.44 cm |
106.68 cm |
|
Overall Width |
34.88" |
41.88" |
47.38" |
53.63" |
62.88" |
72.13" |
88.6 cm |
106.83 cm |
120.35 cm |
136.22 cm |
159.72 cm |
183.21 cm |
|
WEIGHT |
||||||
ABS |
157 lbs. |
187 lbs. |
200 lbs. |
265 lbs. |
315 lbs. |
517 lbs. |
72.21 kg |
84.82 kg |
90.47 kg |
120.2 kg |
142.88 kg |
235 kg |
|
ABS Crated |
203 lbs. |
233 lbs. |
248 lbs. |
315 lbs. |
365 lbs. |
650 lbs. |
92.08 kg |
105 kg |
112.49 kg |
142.88 kg |
165.56 kg |
294.84 kg |
|
Metal |
227 lbs. |
270 lbs. |
290 lbs. |
382 lbs. |
454 lbs. |
N/A |
103.18 kg |
122.73 kg |
131.82 kg |
173.64 kg |
206.36 kg |
||
Metal Crated |
273 lbs. |
316 lbs. |
338 lbs. |
432 lbs. |
504 lbs. |
N/A |
124.09 kg |
143.64 kg |
153.64 kg |
196.36 kg |
229.09 kg |
||
| *Note: Wall opening height and width may vary on some models. Ask for shop drawings for exact sizes. | ||||||
DIMENSIONS for Speedmatic® REVOLVING 3 and 4-Way DOORS |
|||
DESCRIPTION |
3-WAY |
4-WAY |
|
Standard |
Handicapped Accessible |
||
48" |
72" |
54" |
|
Overall Height |
82.25" |
82.25" |
82.25" |
208.91 cm |
208.91 cm |
208.91 cm |
|
Wall Opening Height* |
81" |
81" |
81" |
205.74 cm |
205.74 cm |
205.74 cm |
|
Wall Opening Width* |
49.5" |
78" |
56" |
125.73 cm |
193.04 cm |
142.24 cm |
|
Overall Diameter |
46.75" |
74.25" |
53" |
118.74 cm |
188.6 cm |
134.62 cm |
|
Inside Diameter |
45" |
69.5" |
51" |
114.3 cm |
176.53 cm |
129.54 cm |
|
Inside Height |
74.75" |
74.75" |
74.75" |
189.86 cm |
189.86 cm |
189.86 |
|
Entrance Width |
20" |
36" |
18" |
50.8 cm |
91.44 cm |
45.72 cm |
|
Overall Width |
53.63" |
78.88" |
62.88" |
136.22 cm |
200.36 cm |
159.72 cm |
|
WEIGHT |
3-Way |
4-Way |
|
ABS |
265 lbs. |
641 lbs. |
315 lbs. |
120.2 kg |
290.75 kg |
142.88 kg |
|
ABS Crated |
315 lbs. |
834 lbs. |
365 lbs. |
142.88 kg |
378.30 kg |
165.56 kg |
|
Metal |
382 lbs. |
N/A |
N/A |
173.64 kg |
|||
Metal Crated |
432 lbs. |
N/A |
N/A |
196.36 kg |
|||
| *NOTE: Wall opening height and width may vary on some models. Ask for shop drawings for exact sizes. | |||
| For SPECIMEN Transfer | For CASSETTE Transfer | For FILM Transfer | ||||
| Catalog # | 9045 | 9047 | 9049 | 9055 | 9060 | 9050 |
Overall Height |
20.5" |
29" |
29" |
42.5" |
42.5" |
42.5" |
52.07 cm |
73.66 cm |
73.66 cm |
107.95 cm |
107.95 cm |
107.95 cm |
|
Wall Opening Height |
21" |
29.5" |
29.5" |
40.5" |
40.5" |
40.5" |
53.34 cm |
74.93 cm |
74.93 cm |
102.85 cm |
102.87 cm |
102.87 cm |
|
Wall Opening Width |
21" |
22.5" |
28.5" |
29" |
36" |
49.5" |
53.34 cm |
57.15 cm |
72.39 cm |
73.66 cm |
91.44 cm |
125.73 cm |
|
Overall Diameter |
20.5" |
22" |
28" |
28" |
35" |
46.75" |
52.07 cm |
55.88 cm |
71.12 cm |
71.12 cm |
88.9 cm |
118.75 cm |
|
Inside Diameter |
18.125" |
19.5" |
26" |
25.5" |
32.5" |
45" |
46.037 cm |
49.53 cm |
66.04 cm |
64.77 cm |
82.55 cm |
114.3 cm |
|
Inside Height |
18.5" |
27" |
27" |
35.5" |
35.5" |
35.5" |
46.99 cm |
68.58 cm |
68.58 cm |
90.17 cm |
90.17 cm |
90.17 cm |
|
Entrance |
12" |
13" |
18" |
18" |
21.5" |
30" |
30.48 cm |
33.02 cm |
45.72 cm |
45.72 cm |
54.61 cm |
76.2 cm |
|
WEIGHT |
||||||
Window Weight |
90 lbs. |
100 lbs. |
105 lbs. |
100 lbs. |
110 lbs. |
175 lbs. |
40.5 kg |
45 kg |
47.25 kg |
45 kg |
50 kg |
78.75 kg |
|
Crated Weight |
145 lbs. |
155 lbs. |
160 lbs. |
155 lbs. |
165 lbs. |
215 lbs. |
65.25 kg |
69.75 kg |
72 kg |
69.75 kg |
72.25 kg |
96.75 kg |
|